Ticker

6/recent/ticker-posts

Header Ads Widget

How To Craft An Anvil?

Let's talk about how to craft an anvil that takes a lot of iron to make and can be hilariously dropped on your friend's head. They look simple but there's a lot of depth to them now is warned. We are talking about Minecraft 1.7 and in the future things may change but so far there aren't any rumors. Anything will change anytime soon so let's show them off you know so first what is the recipe for an anvil well open up crafting table. You're going to put three iron blocks on the top and then four iron ingots on the bottom think. This is the head of the anvil and this is the base of the anvil down here. Then you are given an anvil when you throw it on the ground you hear a very satisfying good Chin. When you open it up thesis what the UI looks like let me run through what this is this first area. Where you will be putting the target item this is the item that you're going to be changing with the anvil next is the sacrifice item. This is the item that you’re going to be giving up to the target item. Then this is the output. When you add an item to the anvil it will put the name of the item right up here. You can rename whatever items so let's say this is a crafting table. I want it to be my awesome table woo then you can rename it just like this. Whenever you're about ready to do something with the anvil. It will tell you how many enchantment points it will cost this is taken from your experience level.

You have a level of 30 it will subtract five leaving you with the level of 25 the anvil is also useful for repairing. Items that have been enchanted so this diamond sword has sharpness 5which is a very good enchant. I wouldn’t want to lose it if I was just to take this and put it into my normal craft square here. I will lose the enchantment it will repair this is normally how you repair an item. You put the same item into a crafting table and eat it out but you can see that the output doesn't have the enchantment. I want to keep that enchantment around and that's where the anvil comes in handy by using this tool. You keep the enchantment at the output of that repair you can see that this will cost 25 enchantment costs. We’re going to get into where this cost comes how to craft an anvil from in a bit you can repair items with either the same item. I have this diamond sword and we can use another diamond sword. You can grab the base item from it so what you do is you look at what is in the first part of the items. So this is an iron sword so we have ironwood and stone and diamond and gold. Those are what are the base materials of an item that's how you find that out quickly. I take this sword and place it in I can put a diamond in with it. Then it will use up and repair up to 25% of the damage on this sword. You're confused when I’m talking about do you see that little green bar that means.

You're not going to want to miss I’m going to show you how to craft an anvil. For the lower back that is going to help self-mobilize it so that’s going to give you that pop or crack. You're looking forth a nice thing is all of these can be done at home. They don't require any special equipment as a side note I want to make sure. You know that this isn’t a substitute for a is not a chiropractic adjustment. These are just simple stretches that may result in pop or crack in the lower back with that said. Let's get the lower mobilized at home so this first exercise a standing corkscrew stretch. This one is great because you can pretty much do it anywhere. What I’m going to do is go next to the door and I’m going to place my back completely flat against it. That way it offers us a lot of support while we do this exercise. Let’s take the hand closest to the doorknob and just grab onto it like this. This is going to be our anchor point whatever side is closest to that doorknob. Let's lift that side's leg up like this to the point where the hip and the knee are bent pretty much at 90 degrees. I’m going to do is take the opposite hand on the other side grab behind the knee. I’m going to do is slowly rotate that leg towards the opposite side. When I do this you're going to feel A very good amount of stretch into the want to try to keep. Your upper back including the shoulders as flat against the door as possible.

While you do this keep going until you feel a very good stretch if it is pretty locked up. You may feel that pop cracker release. You’re looking for and at that point, you're good to go. You need to just relax after about 10 to 15 repeat up to five times it may take a couple of times. It's just for it to from there if you still feel like it’s locked upend it's not releasing. What you can does add a little bit of a passive stretching there so let's build back up into that point. Where it's you know feeling like a very good stretch and then from there what. I’m going to does just bring the knee back just a little bit further very quickly just like that. When you do that it's going to put a how to craft an anvil a little bit more into that joint and possibly. Get it to pop crack once you're done with that what you can do is just simply switch to the other side. Then just repeat when you do this you want to do it on both sides to keep both sides and the muscles in balance. Let’s take the corkscrew stretch to the next level this one is the perfect to-do in bed. Let’s go to the edge of one side of the bed right here and we're going to bring our legs down while one goes up just like this.

Let's go somewhere quieter about how to craft an anvil if people had found out. You are my son would have been in danger that's Hanta weird as always anyway see. You later this entire place is a fake skill yes that means something to me. The boy nothing if you mean that you’re an even bigger rat. I thought okay that’s enough calm down Narrator he's not the enemy not right no whey kid. You're not hurt are you scaredy-cat Sakura what was that what did you just say. I said was I love you nothing really I just finally realized. My true feelings look Sakura what happened to you just suddenly started liking me. I told you nothing's happened as to why I fell in love with you. It's obvious then you give me comfort from the bottom of my heart. I care about you what it just stopped Sakura this joke of yours isn't funny at all over there. I here and welcome to this video now for those who've been wondering like didn't. How to kill anyone within the series um I’ve been I wasn't doing much actually. I've been more focused on my dedication to education shoot and as an and as people may know education is key to success.

How To Craft An Anvil

I do want education to be a part of my lifetime. I don't want you to be like winning the wait for I’ll talk more Harlan says. I'll put more on time or social on YouTube more than my education that's what. It's actually getting quality bluetongue education. Now it's going for the I think to understand one understand school fashion stuff. Do some more content so I as you can see I was actually running out of ideas. I should make it because like most of these. I will be covered by other breaks and choose which way better than me in another way. I found a video or a thought in video that no one has actually ever talked about. I might be the first-ever are to talk about this now do you see some elite you to action 8 this war. I made it before them so keep that in mind so I started. I'm going to create a list of what exists to watch and not watch Hanta and the movies. I put in how to craft an anvil episode that fit between what episode is what in what this is what soya um. As you can see I'm not going to try to make this be away too long. This is really short but I'm just going Toto know if you do want to watch Narrator this is a list. This is in frost gander order by the way so just keep this in so yes there are a couple of things. I need to mention so first of all you see some numbers it represents the episode.

The next string ghetto makes sure these pins are staying in the bridge so again. I'm going to measure up the distance of one and a half-machine heads from the machine head. You ‘rewinding which is about where I'm going to clip the string again going in and winding. It from the center or the middle of the headstock okay. I'm just leaving a little bit sticking out the other side and just get that started and just kind of put. Some pressure on it holds it down and starts winding again from the top. Tithe bottom and of course make sure it lines up in the appropriate nut slot sowed have our first two strings on. Let’s continue to process okay now that. I've made it to the other side the headstock same process same everything except. I'm just going to insert the string from the opposite sides coming in from the middle in the center. I'm going to go through this way instead. This way again measuring outdone and a half-machine heads which are about. here how to craft an anvil I'm going to clip that string just want to go in from this side towards. The center-pull the string back gives it. Some tension there and starts winding in the opposite direction. The last three again winding from the top tithe bottom of the peg being. Sure not to overlap the wines you want to end up in the bottom of the peg there. You go and let’s continue to the last two and as I mentioned for the wound strings. You don’t want to overlap the strings in the peg but actually for the unwound strings. You want to have your first winding above the inserted string on the peg and the second. Yellow this will hold the string in place and the strings are thin enough. I won't affect tuning okay now that we have all six strings on the guitar. You're ready to tune it up to pitch and start playing.

Now there are a couple different reasons why you would want to change how to craft an anvil. Your strings one and the obvious reason is that they just look dirty. Maybe they sound dull and or just maybe broke a string now you can change. Broken string or if you choose to you can change the whole set at one time the materials. We'll need are pretty simple string winder wire or string clippers. Your new sets of strings for acoustic guitar. I'm not going to take all the strings off all at one time. I’m actually going to do it in twos I'm going to do two strings at a time take two off and put two back on this way. I keep some of the tension on the top of the guitar okay. I'm going to take my string winder here start with a low E string loosen the tension on that one and the second one. You can see these two are nice and loose alright put this back here take my string clippers. We’ll clip these two strings above the sound whole okay. I'm going to unwind these strings from the peg make one here. This one just pulls those off it's going to wind these up for easy disposal and by disposal. I mean just throw them on the floor and then also take my string winder. Here again, there’s a little cutout on the winder that’s used to pry up the post from the bridge sometimes you could do it.

Your hand but sometimes if it’s stuck you're better off using the winder. We'll pop these two and I want to leave these in order so I'm just going to put these here. I know which ones go back where now I take my new setoff strings. I'm going to use this Fender fuss for bronze medium gauge strings and fender makes. It was very easy to know which strings go where by including. This handy dandy string guide on the packaging okay. I’m going to start with my low E string which is the brass or the gold ball end here take the bridge pin. You can see here on the bridge how to craft an anvil pin there's a little cutout that corresponds with the string. When it's inside the bridge so what I'm going to do is when they put the string in first and then be sure. Put the pin in with the cutout facing the string. I’m just going to press that in and pull up on the slack okay and just. let hang for right now I'm going to take the next string which is the candy. Apple or their ball end and repeat the process the string in have a little groove. The cutout facing the string press that inland pulls off the slack. Now I'm ready to attach the strings tithe machine heads okay so I'm going to start with my low String. Be careful on your end pins sometimes I like to pop back up just need to push them back.

Everyone and welcome back to Swift guitar lessons today. I'll give you a quick maintenance lesson. How to change a string on an acoustic guitar to get the job done. We're going to be using these earth wood Ernie ball guitar strings my personal favorite. This a string winder just get those strings on a little faster. Let's get started alright so we've got a close look at the guitar. We've all been in this situation before we've just popped. In this case, our g string the first thing. I need to do is use my string winder most of these have a little notch. Here for prying up the bridge pin so that’s the first thing. I'm going to do pop up the bridge pin get underneath there get a little leverage and then out it comes okay. So this is a great tool. I'm going to take how to craft an anvil the old string out and discard it get my bridge pin back. I pulled the 22gauge string out of the Ernie ball earth wood light gauge string set okay. I’m going to pop this new string out it should only take a couple of minutes to get this together. Now grab the ball attend of the string I'm going to drop the ball end into the bridge.

Now the fluted side of my bridge pin is going tube facing that string. While it's inside the bridge, I'm just going to push down and pull up on the string. I push here we go alright and that sits nice and easy. We're ready to attach it to the tuner okay so now. We have the new string inside the bridge we’re ready to remove the old string from the tuner. how to craft an anvil we just unwind it pulls it right out does it usually fight too much alright. We're ready to get rid of this. We’re going to drag our new string upend through the eye hole of our tuner okay. So having a string winder is going to make this a lot easier. We're just going to put it right here on the string tuning knob and turn it counterclockwise. I'm holding the string down with my left hands that way it stays nice and taut want to get a nice tight line. We want to bend the string across the tuner it’s what we call notching tighten it upend finally. We're ready to cut off the excess and we're good to go alright everyone thank you. So much for watching hope you enjoyed this. How to change an acoustic guitar string. I play more coming up so keep checking back and please subscribe. I’m Rob from circuit our lesson to Philadelphia St. heck face. This is John Dreyer for Fender University and I like to show. You one way to change the strings on your acoustic guitar. Now there are a couple of different reasons why you would want to change. your strings one and the obvious reason is that they just look dirty.

Maybe they sound dull and or just maybe broke a string now. You can change that broken string or if you choose to you can change. The whole set at one time the materials. We'll need are pretty simple string winder wire or string clippers. Your new sets of strings for acoustic guitar. I'm not going to take all the strings off all at one time. I’m going to do it in two. I'm going to do two strings at a time take two off and put two back on this way. I keep some of the tension on the top of the guitar okay so I'm going to take my string winder here start with a low. String loosens how to craft an anvil the tension on that one and the second one. You can see these two are nice and loose alright put this back here take my string clippers. We’ll clip these two strings above the sound whole okay. I'm going to unwind these strings from the peg make one here. This one just pulls those off it's going to wind these up for easy disposal and by disposal. I mean just throw them on the floor and then also take my string winder. Here again, there’s a little cutout on the winder. That’s used to pry up the post from the bridge sometimes. You could do it with your hand but sometimes if it’s stuck you're better off using the winder. We'll pop these two and I want to leave these in order so I'm just going to put these. So I know which ones go back where. Now I take my new setoff strings I'm going to use this Fender fuss for bronze medium gauge strings. Fender makes it very easy to know which strings go where by including. This handy dandy string guide on the packaging okay.

 

Post a Comment

0 Comments